orbi login

Setting up Netgear Orbi requires certain steps to follow in a specific order. Below are those like orbi login steps with details. Note: If you face any confusion in the given steps, feel free to comment below. 

Plug-in Orbi Router

You should plug in your Orbi router and satellite to the same power source. You’ll want to make sure that they are plugged into the same outlet, or else it won’t work properly. If you have a spare electrical outlet, use it.

Download Orbi App

  • You can download the Orbi app from the Play Store or App Store. The app is available for Android and iOS devices.
  • Once you’ve downloaded the Orbi app, open it and follow the orbi router login and installation instructions on screen to connect your new router to your home network. 
  • You’ll need to enter an email address as well as a password when setting up your account.
  • Don’t worry, these details are safely stored in Netgear’s servers so that you can access them again if you need to reset or reinstall your router in future (we’ll cover this later).

Power on the Router And The Satellite.

  • Power on the router and satellite.
  • Wait for the lights to turn green on both devices. If they do not turn green, reset the router and satellite. The reset button is on the back of each device.

Open The Orbi App

To set up your Orbi router, you need to first download the Orbi app from the App Store or Google Play.

  • Once you open the app, enter your Netgear account credentials. 
  • Make sure that you have an active internet connection on your device.
  • Then select “Add New System” from the bottom menu bar of your screen. 
  • The next screen will ask for a name for this network, so type in something descriptive like “Home Router” or “Office Network” and tap Next when done.
  • The next screen prompts users to select between connecting a satellite directly to their main router or connecting it wirelessly.
  •  If you choose to connect one satellite directly through Ethernet cable first before adding a second satellite using Wi-Fi connectivity.
  • Choose either Cable Connection or Wi-Fi Extension depending on which method works best.

That’s all you have to do to set up your Orbi Wi-Fi System. You can now start enjoying fast and reliable Wi-Fi connection.

How to Install And Setup Netgear Orbi

Setting up your Orbi Wi-Fi system is a straightforward process that will take about two minutes to complete. The first step is unpacking the Orbi router and satellite and plugging them both in. Then, you’ll download the Orbi app for Netgear orbilogin on your smartphone. Once that’s done, you can open the app and follow its instructions to configure your WiFi network. 

Unpack Orbi Router and Satellite

  • Unpack the router and satellite.
  • Remove the plastic wrap from the Orbi router and satellite to reveal its sleek, modern design.
  • Remove the antennas from your satellite, then attach them to your router by sliding them into place on top of it. 
  • You can do this by hand or with a screwdriver if necessary. 
  • The antenna’s connectors should fit into grooves inside each other when properly attached.
  • You should feel a click when you put them together correctly. If using a screwdriver, make sure not to tighten too much as this can damage both pieces.
  • Attach your power cord to your satellite and plug it in near an outlet before connecting it via Ethernet cable(s) or Wi-Fi connection. 

Note: You must have Orbi products within range of each other—the more satellites available means more coverage area. Else, you may face an error – orbi not working.

Orbi allows you to connect multiple devices at home, but if you want to create a secure network for your family, then consider setting up a separate guest network with parental controls. 

Setup Steps

Here are the steps to set up your Netgear Orbi:

1. Plug in the router and wait until it’s fully connected to your modem and powered on.

2. Download the setup app from Google Play or Apple’s App Store and open it on your smartphone or tablet.

3. Use the app to connect to the router, then follow the instructions on screen to create an account with Netgear (if you haven’t already).

4. Once you’ve created an account with Netgear, log into it using the email address and password associated with your account (or create one if necessary).

5. Next, select “Set up a new device” from within the app, then choose whether you want to set up a satellite or extender device (see below for more information).


Congratulations! You have successfully installed and set up your Orbi Wi-Fi System. Now, you can start enjoying fast and reliable Wi-Fi connection.

Leave a Reply

Your email address will not be published.